LMS GPA 20 RE GIN POLE

Gin Pole Aluminum 20″ w / rooster head and roller end

LMS GPA 20 RE Gin Pole manufacturing, servicing, inspections, and repairs we are the primary source for these services for all of the Americas since 2011. We manufacture the finest Gin Poles in the world with a 100% safety rating worldwide, LMS Gin Poles are manufactured with steel or aluminum in all sizes. Custom models build for elevator transport for rooftop antennas and towers. Poles are built are round poles, (GP) triangle poles, (PT), and square poles with jump tracks, (PS). Our poles are Electrostatic coated for long life and ease of handling and safety. You can also find Landa Mobile Systems towers HERE You can also find other LMS news HERE

Manufactured to ANSI/TIA-322

AWS Certified
U.S. AWS Certified welder assembled
U.S. Certified Gin Pole AWS welder assembled
Certified AWS independent U.S. contractor inspected
AWS D1.1:2015 structural welding code-steel compliance
Load charts are pole specific with matching serial numbers
5.0 Analysis and design of Gin Poles
6.0 Gin Pole construction
Rooster head
Roller tail
Round poles are not man-rated

Weights

149 Lb / 68 Kg Pole weight
Lb / Kg slip rooster head
Lb / Kg top section
Lb / Kg midsection with slip
Lb / Kg end section w/o slip and tail roller
Lb / Kg Wood shipping crate

OSHA required Forms supplied with all LMS Gin Poles we manufacture.

Annual Pole Certification signed and numbered
Annual Pole Inspection Report signed and numbered
VT Visual Welding Inspection Report, done at the time of manufacture
Mill Report
Charpy report
PE Stamped Pole specific Load Chart to ANSI/TIA-322 standard.

Gin Pole Classifications

Class	Gross Loading	Load Line Size	Impact Factor Req’d steel wire rope
A	0 < 1,000 Lbs	d<= 5/16″	1.45
B	1,000 < 3,000 Lbs	5/16″ < d <= 7/16″	1.35
C	3,000 < 10,000 Lbs	7/16″ < d <= 9/16″	1.25
D	10,000 + Lbs	d > 9/16″	1.20

Sample Round Gin Pole Load Charts

Sample charts are pole specific with serial numbers.

Serial numbers on Pulleys must match the serial number of the Gin Pole. This will be required to complete the annual Gin Pole Inspection. All gin poles using a load line other than steel shall be classified as class A Gin Poles for all load line diameters.

We do not supply any accessory hardware or assembly bolts. Use 1×2.5 A325 Structure bolts, washers, and nuts only. Remember to inspect before re-using

Complete records of pole inspections and record of Magnetic particle inspection shall be performed on 10% of the welded connections every 10 years. Annual inspection reports shall be maintained for a minimum of two years. All gin pole operations must be in compliance with the latest revision of ANSI/TIA-322 and the OSHA CPL 2-1.36, Maintain your required documents along with work plan, engineer sign-off for each specific job.

Certified Green Gin Poles are manufactured 100% from USA recycled steel.